Computed Radiography vs. Traditional Film Radiography Webinar: Is Your Operation Ready to Transition? - Braun Intertec

你知道计算y射线照相法适合our operation? With the right set of tools and knowledge, the transition from traditional film to digital is more straightforward than you’d think. With computed radiography rising in popularity, fabricators, constructors, foundries, and manufacturers are learning the value of qualified NDT technicians to implement the cost-saving computed radiography processes.

Watch the recorded version of the webinar as our NDT experts, Ken LeBlanc and Wesley Soape from the La Porte, Texas Braun Intertec office, dive into the benefits of computed radiography.

Learn more about:

The difference between traditional film radiography and computed radiography
The importance of well-trained computed radiography technicians
Choosing the right radiography method for your project
How computed radiography enhances project safety

Complete the form below to watch a recording of the webinar.

Meet the Speakers

Ken LeBlanc
Nondestructive Examination Operations Manager – Gulf Coast

Ken is an ASNT NDT Level-III in UT, RT, MT, PT and VT / AWS CWI based in our La Porte, Texas office, brings 29 years of experience, leadership, project management experience and technical expertise serving clients within the fabrication, process, refining and transportation sectors across Texas.

Wesley Soape
Nondestructive Examination Technician Level III

Wesley has over 13 years of experience as a nondestructive technician in a variety of industries including manufacturing, subsea, aerospace, midstream oil & gas, and energy production. Wesley is based in our La Porte, Texas office.

Other Articles You Might Like

White Paper

January 29, 2020

Advancements in Deep Foundations: Augered Cast-In-Place Piles

Located in downtown Fargo, North Dakota, the Block 9 Redevelopment project site contains highly-compressible soils in the upper 100 feet with groundwater about 10 to 15 feet below the existing ground surface. The owner prohibited using driven piles to avoid disturbing neighbors of the project and historically, drilled shafts are used in Fargo as a reduced noise and vibration alternative to driven piles. However, developments over the last 20 to 30 years in drilling equipment, load testing and integrity testing resulted in the project team identifying augered cast-in-place piles as a suitable alternative for this project. To reduce the risks...

Webinar

January 3, 2018

[OnDemand Webinar] Firestopping Special Inspections

Building code and fire inspection officials recently began strict enforcement of code requirements for firestopping inspections.The International Building Code (IBC) 2012, Section 1705.16 states that firestop inspections shall be included as part of the mandatory special inspections for high-risk facilities. But what is firestopping and is my building considered high-risk? Fill out the form below to watch a recorded version of our firestopping webinar....

Article

June 6, 2016

Why Safety Matters to Braun Intertec

June is National Safety month, and in observance of this important topic we will post a new article each week in June that focuses on safety to promote a safe and healthy workplace. Check back next week for the next post in this safety series. One of the most important things we do at Braun Intertec is create a safe and healthy work environment. As an employee-owned company full of field technicians, environmental scientists, engineers and more, we encounter hazardous situations in our work every day. Whether on a job site, a drill rig, in our labs or garages, safety...